Rule For Expanded Vinyl

Catalog Number Thickness (mm)
    86     1.5
    87     2.25
    87 Bis     3.0


Dome Creasing Rule

Catalog Number Thickness (mm)
    20 - Dome     1.0
    21 - Dome     1.5
    22 - Dome     2.25
    23 - Dome     3.0
 Dome creasing rule minimizes cracking at flex areas useful in  combination with steel cutting rule for specialized applications.


Tearseal Knife Rule

(Center-Bevel & Single/Side Bevel)

Center-Bevel
  

Single/Side-Bevel
Catalog
Number		 Thickness
(mm)		 Catalog
Number		 Thickness
(mm)
    80/A     0.7     80/B     0.7
    81/A     1.0     81/B     1.0
    82/A     1.5     82/B     1.5
    83/A     2.25     83/B     2.25
When this rule is to be used alone and not in combination with any other rule. It is not necessary to specify a tearseal step differential except for the purpose of maintaining continuity in purchasing standards. However, when used in conjunction with other rule, the tearseal step must be specified in order to maintain proper rule height relationships


Weld / Embossing Rule

(Without Tearseal)
Catalog
Number		 Thickness
(mm)		   Catalog
Number		 Thickness
(mm)		   Catalog
Number		 Thickness
(mm)
20  1.0 39  6.0 79  2.25
20-Dome  1.0 40  3.0 88  3.0
21  1.5 41  3.0 89  3.0
21-Dome  1.5 44  1.5 89 Bis/2  2.25
22  2.25 45  2.25 89 Bis/3  3.0
22-Dome  2.25 46  3.0 89 Bis/4  4.0
23  3.0 47  4.5 90  3.0
23-Dome  3.0 48  6.0 91  3.0
23 A  4.0 49  7.5 93  1.5
23 B  4.5 50  1.5 94  1.5
23 C  6.0 51  2.25 96(Dek-L)  1.5
23 D  7.5 52  3.0 99  1.5
23 E  9.0 58  4.0 100  2.25
24  1.0 60  2.25 101  2.25
25  1.5 61  3.0 102  3.0
25 Bis  2.25 62  4.5 103  3.0
25 C  3.0 63  6.0 104  2.25
26  1.5 64  7.5 105  3.0
27  1.5 65  9.0 107  3.0
28  2.25 66  1.5 108  4.0
29  2.25 67  2.25 109  3.0 / 4.5
29 A  2.25 68  2.25 110  6.0
 7.5
 9.0
30  3.0 69  3.0 111  3.0
 4.5
 6.0
 7.5
 9.0
31  1.5 70  1.5 112  3.0
32  2.25 71  2.25 113  3.0
33  1.5 72  3.0 114  4.0
35  2.25 73  4.5 115  2.25
36  2.25 74  6.0 117  1.5
37  3.0 75  7.5 USA-7  7.0
37 Bis  Zipper
 End 3.0		 76  9.0 USA-8  7.0
38  4.5 77  1.5    
38 Bis  Zipper
 End 4.5		 78  2.25    

NOTE! Illustrations are exaggerated for clarity!
© Copyright 1992 - High Frequency Technology Co., Inc. - Licensed to High Frequency Tooling, Inc.

 

 

High Frequency Technology Co., Inc
172 Brook Avenue
Deer Park, New York 11729

Tel. 1-800-342-3020     Fax. 631-242-4823     E-Mail: Info@HFTInc.com

No Portion Of This Web Site May Be Reproduced
Without The Written Permission Of High Frequency Technology Co., Inc.