Catalog Number	Thickness (mm)		Catalog Number	Thickness (mm)
	1	1.5		11	2.25
	2	2.25		12	2.25
	3	3.0		13	3.0
	3 Bis	3.0		17	3.25
	4	4.5		84	2.25
	5	1.5		85	3.0
	6	2.25		92	2.25
	6 Bis	3.0		97	1.5
	7	2.25		98	2.25
	7 SP	2.25
	8	3.0
	9	3.0
	9 SP	3.0
	10	2.25

	Catalog Number	Thickness (mm)		Catalog Number	Thickness (mm)
	1 SP	1.5		5 SP	1.5
	2 SP	2.25		6 SP	2.25
	Recommended for sealing dies to be used in hydraulic sealing presses in order to minimize possible damage to knife edge caused by unusual high press ram force. Recommended for matching to common knife tearseal rule such as NRS. 42, 43, 43SP, 106, 106 Bis

	Catalog Number	Thickness (mm)		Catalog Number	Thickness (mm)
	53	2.25		SP/2	1.5
	54	3.0		SP/2	2.25
	This rule produces a flat weld with adjacent tearseal not having a "beaded ridge" between the weld and tearseal.			SP/2 type rule produces a weld similar to #53 without having an inside chamfer.

("Common Knife")

	Catalog Number	Thickness (mm)		Catalog Number	Thickness (mm)
	42	2.25		106	2.25
	43	3.0		106 Bis	3.0
	43 SP	4.0		120	3.0
	Used for making multiple cavity dies having a common tearseal between cavities.  Nr. 42 matches to Nr. 1 (also to 1-SP)  Nr. 43 matches to Nr. 1 & 2 (also to 1-SP & 2-SP)  Nr. 43SP matches to Nr. 2 (also to Nr. 2-SP & Nr. 3)  Nr. 106 matches to Nr. 5 (also to Nr. 5-SP)  Nr. 106 Bis matches to Nr. 6 (also to Nr. 6-SP)

	Catalog Number	Thickness (mm)
	SP/1 - T	1.5
	SP/1 - T	2.25
	SP/1 - "Modified" feather edge rule eliminates the need for using top and bottom matched dies.

	Catalog Number	Thickness (mm)
	19	2.25
	35	2.25
	116	2.25
	121 (Label)	2.25

NOTE! Illustrations are exaggerated for clarity!  © Copyright 1992 - High Frequency Technology Co., Inc. - Licensed to High Frequency Tooling, Inc.   High Frequency Technology Co., Inc 172 Brook Avenue Deer Park, New York 11729 Tel. 1-800-342-3020     Fax. 631-242-4823     E-Mail: Info@HFTInc.com No Portion Of This Web Site May Be Reproduced Without The Written Permission Of High Frequency Technology Co., Inc.